Page 45 of 47 FirstFirst ... 3541424344454647 LastLast
Results 441 to 450 of 467

Thread: Redsn0w 0.9.15b3 Tethered/Untethered Jailbreak for iDevices on iOS 4.x.x - 6.1.5

Share/Bookmark
  1. #441
    Ex-Jnr.Admin Mega Poster HOUSE M.D's Avatar
    Phone model
    N95,E90,Iphone 3GS/4G
    Join Date
    Feb 2008
    Posts
    7,188
    Blog Entries
    1
    (61681)

    iPmart Redsn0w 0.9.15b3 Tethered/Untethered Jailbreak for iDevices on iOS 4.x.x - 6.1.5

    DOWNLOAD
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ][Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    •ultrasn0w 1.2.7 — install this via Cydia


    iPhone Dev-Team have just updated Redsn0w, adding full support for final public release of iOS 6 on select devices with official version of Cydia, along with tons of new features which are detailed after the jump.

    Redsn0w 0.9.15b1 for both Windows and Mac not only adds support for tethered jailbreak of iOS 6 on A4 based devices, but also for re-restoring and downgrading of select devices from iOS 6 to an older firmware, or in case of re-restoring, from iOS 5.x to iOS 5.x.


    New Features:
    ● restore from any 5.x iOS to any other (up, down or the same) 5.x iOS on all devices as long as you have the correct blobs (see more below)
    ● Cydia now included in the tethered 6.0 jailbreak on A4 devices
    ● automatically "Just Boot" tethered when qualifying A4 device connects in DFU mode
    untethered 6.0 jailbreak on old-bootrom 3GS
    ● untethered 6.0 hactivation on any 3GS or iPhone4
    ● directly restore pre-A5 devices to earlier firmware - no more complicated 15-step how-to's with stitching, iTunes errors, and "hosts file" concerns
    ● fetch new signed blobs for any IPSW (present or future - no redsn0w update required) using Extras->SHSH Blobs->New
    ● block the BB update for any 3GS or iPhone4 restore (past, present, or future - no redsn0w update required) using Extras->Even More->Restore
    ● deactivate any iPhone, useful for testing your "official" unlock status through iTunes. (Please only deactivate your own iPhone!)
    ● activation status shown on "Even more" page
    ● significantly more (very nerdy) info returned by "Identify" button when device is in Normal mode
    ● tethered jailbreak of ATV2 supported (but the only thing available for it is the SSH2 custom bundle available here - no Cydia yet. Must use "Select IPSW" for tethered boot of ATV2 for now).
    ● auto-exit WTF mode for older devices with broken buttons
    ● any time a set of blobs is fetched remotely (from Apple or Cydia), redsn0w also saves them locally (and will check there first if you click "Local")
    ● for your future restoring convenience, you should also submit all of your past and present TinyUmbrella blobs to Cydia if you haven't done so yet. Resubmitting is okay and won't cause conflicts.


    iOS 5 to iOS 5 Restores for A5+ Devices

    1. redsn0w now lets you restore an A5+ device from any iOS5 to any other iOS5 as long as you have correct 5.x blobs for the starting (current) and ending points of the restore
    ● APtickets eliminated "higher-version only" comparison of firmware restores (just like BBtickets did for the baseband)
    ● example restores supported by redsn0w if you have the correct blobs: 5.1.1-to-5.0.1, 5.0.1-to-5.1.1, 5.1.1-to-5.1.1, 5.0.1-to-5.0.1
    ● if you don't have the blobs locally, let redsn0w try to fetch them remotely (redsn0w always tries both Apple and Cydia). Any succesful remote fetch also saves a local copy too.

    2. You DO NOT QUALIFY for iOS5-to-iOS5 restores if you got to your current 5.x via an OTA update
    ● the tickets saved by Cydia, redsn0w, and TinyUmbrella do not cover OTA update ramdisk images
    ● even if they did, it's the "wrong kind" of ramdisk (you'd need to start at that earlier pre-OTA FW)
    ● devices fresh from factory or refurb may fall in the "does not qualify" category (your results will vary)
    ● it's okay if you previously got to 5.x via an OTA update, as long as your current 5.x was installed via a normal iTunes restore. All that matters is how you got to your current 5.x most recently
    ● redsn0w detects an OTA/normal-restore APticket mismatch very early, so if you don't know your status there should be no harm in trying. Any device in recovery mode after such a mismatch can boot normally again just by going back to "Even More" screen from the "Restore" screen (or use "Recovery Fix" if you quit redsn0w before doing that).

    3. Unlike the A4 devices, redsn0w can't (usefully) prevent the baseband updates of A5+ iPhones and iPads.
    ● and so, redsn0w automatically flashes the currently signed baseband when it does A5+ restores, even if those basebands didn't come with the original firmware
    ● stay away from this if you have an unofficial unlock that isn't supported by the newest baseband
    ● the least-tested baseband update code in redsn0w is for iPad2,3 and iPad3,2. Please give any feedback on those iOS5 restores in the comments section below.

    4. iPad2 owners (all three models) with saved 4.x blobs can use those instead, even from 6.x
    ● if you have both 4.x and 5.x iPad2 blobs, you can always get to 5.x via the 4.x blobs, even if you're currently on 6.x
    ● you cannot get to 5.x from 6.x without the 4.x blobs (but you may still qualify for the iOS5-to-iOS5 restore described above)
    ● if somehow you have 4.x blobs but no 5.x blobs, you can still go down to 4.x from 6.x
    ● this only applies to iPad2 owners (they're the only A5+ devices that ever had a public 4.x FW)
    ● redsn0w still supports (but doesn't require) jailbreaking A5+ devices at 5.0.1 and 5.1.1. Just head back to the first page after re-restoring to 5.x. It's always much faster to jailbreak those FW versions with a freshly-restored device, before letting iTunes restore from a saved userland backup.

    5. ultrasn0w isn't yet updated for 6.x
    ● by now you probably should be taking advantage of the extremely cheap IMEI-based unlocks of iPhones sold by established online retailers like [Only registered and activated users can see links. ] ● still, IMEI-based unlocks don't work in all cases. We'll announce when ultrasn0w is ported up to 6.x
    ● redsn0w will still hactivate your 3GS or iPhone4 if you run it before the device is activated. Due to the current tethered 6.x JB status, redsn0w now hactivates 6.x without requiring subsequent tethered boots. If you accidentally hactivate with redsn0w, use the "Deactivate" checkbox available from the Jailbreak screen, not the normal one in "Even more"

    6. As always, redsn0w lets you "Fetch" the SHSH blobs currently flashed onto your pre-A5 device
    ● use this if you're at 5.x or 4.x but without having saved your blobs when the window was open
    ● this is only useful when Apple is no longer signing the firmware, otherwise Cydia/redsn0w "New"/TinyUmbrella blobs are superior (but you're welcome to fetch your 6.0 blobs this way anyway)
    ● fetching blobs in this fashion will automatically forward them up to Cydia, as well as save a local copy

    Supported devices
    :

    First and foremost, it is important to note this is a tethered jailbreak and is only meant for devices boasting an A4 processor (or below), namely: the iPhone 4, iPhone 3GS and the 4th-gen iPod touch. Devices with A5 (iPhone 4S, iPad 2), A5X (iPad 3) and A6 (iPhone 5) processors are not supported at this point. Hacktivation + baseband preservation support has also been added for iPhone 4 and 3GS.

    This latest version of Redsn0w does not require the user to go through the trouble of downloading and pointing the app to the iOS 6 IPSW for the jailbreak (the older version of Redsn0w, required manual IPSW selection). Instead, the latest Redsn0w recognizes the firmware already installed on your device, downloads the required files and proceeds with the jailbreak. It’s that simple. Cydia, as mentioned above, is now also included as part of this Redsn0w’s release.

    A tethered jailbreak means you will need to connect your device to the computer each time you reboot.

    Step One
    Create a folder on your desktop called Pwnage

    Download the latest version of RedSn0w and place it in the Pwnage folder. Likewise, download the 6.0 firmware and place it in the Pwnage folder. (Note: you do not need to download the 6.0 firmware if you are already on iOS 6.0)

    Extract the RedSn0w zip file to the Pwnage folder.

    [Only registered and activated users can see links. ]

    Step Two:
    If you haven't already updated to iOS 6 then open iTunes from your dock.
    [Only registered and activated users can see links. ]

    Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
    [Only registered and activated users can see links. ]

    Navigate to the Pwnage folder on your desktop and select the 6.0 firmware ipsw. Click the Choose button to continue.
    [Only registered and activated users can see links. ]

    iTunes will now update your iPhone to the new firmware.

    **Important: If you want to keep your UltraSn0w unlock, you may follow the appropriate instruction for how to unlock

    Step Three
    Right click or control-click the redsn0w application from the redsn0w folder we extracted earlier and choose Run as administrator from the popup menu that appears.
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    Step Four
    Once RedSn0w opens ensure your device is connected and click the Jailbreak button
    [Only registered and activated users can see links. ]

    Step Five
    Turn OFF your device then click the Next button
    [Only registered and activated users can see links. ]

    Step Six
    RedSn0w will now guide you through the steps to get into DFU mode.
    [Only registered and activated users can see links. ]

    Hold down both the Home button and the Power button for 10 seconds.
    [Only registered and activated users can see links. ]

    Release the Power button and continue holding the Home button until RedSn0w detects the device.
    [Only registered and activated users can see links. ]

    Step Seven
    Your iPhone will now be exploited with limera1n.
    [Only registered and activated users can see links. ]

    Step Eight
    RedSn0w will now prepare the jailbreak data.
    [Only registered and activated users can see links. ]

    Step Nine
    Select Cydia from the list of options and click Next.
    [Only registered and activated users can see links. ]

    Step Ten
    Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.
    [Only registered and activated users can see links. ]

    Step Eleven
    Once this is complete you will be notified that RedSn0w is done and that this is a tethered jailbreak.
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]


    BOOT TETHERED
    Once you have jailbroken you will need to rerun redsn0w to boot tethered.

    Step One
    From the main RedSn0w menu click the Extras button.
    [Only registered and activated users can see links. ]

    Step Two
    Select Just boot from the Extras menu to boot tethered and follow the instructions to put your device into DFU mode again for boot.
    ]
    Done.
    Last edited by Barbiox Dogg; 1st November 2012 at 23:40. Reason: Updated to 0.9.3
    "People get what they get it's not what they deserved"




  2. Welcome

    To see more of this thread, please login or register.
Page 45 of 47 FirstFirst ... 3541424344454647 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •